Save Now on an Excellent Rohde & Schwarz Portable Radiomonitoring Solution

The Rohde & Schwarz EB200 is a quality miniport receiver renowned for its reliability. Portable and sturdy, it is commonly used for spectrum monitoring over wide ranges of frequency between 10 KHz and 3GHz. Field proven, it’s a popular choice in its class for signal detection and locating undesired emissions including pulsed emissions.

The EB200 is effective for monitoring and detecting signals that are not licensed. Ease of operation, including receiver functions by remote control, is possible by modem and PC via serial interface. Switching times below 3 ms are achievable via a modern synthesizer technology that offers very low phase noise. Quality memory and frequency scanning is the result. Can also easily double as an equipment signal finder or locator by combining with a handheld directional antenna.

 Learn more about the Rohde & Schwarz Portable Radiomonitor here

Ideal For Field or Lab Use

Clients report very positive results. Reliability and longevity are producing high demand for these models. It is considered one of the best in its class, and is frequently used by the military due to its ease of mobility, providing universal in the field capabilities.

The EB200 is lightweight and small, and can be carried along to any location with absolute ease. These units are durable with low failure rates, and are designed for high use making them ideal for buying refurbished. Sturdy construction includes a strong aluminum housing that resists wear and tear. The operating elements are well protected inside the housing. Can be used in remote areas with limited access and no power sources. With this in mind, its low power consumption is ideal. A strong battery life is the result, usually lasting up to 4 hours under normal usage. If you plan to use the device for longer periods, spare battery packs are readily available and are easily interchangeable and portable.

Frequency Scanning Capabilities

The EB200 offers ease of use, good scanning functionality, and excellent speeds. 12 Bandwidths are available on Digital IF from 150Hz to 150KHz. Options include being able to allocate a complete data set by defining a specific frequency range. The data set can include the following parameters; Signal Continuation control, step width, hold time, suppression (individually or by individual frequency), and dwell time.

This is a sophisticated instrument that can detect interference from most unlicensed sources and commonly used for security applications, in addition to monitoring frequencies that you pre-select. This is not a low cost tool for the casual user.

Save Thousands off List Price

Network analyzers have over the years greatly improved the functionality of detecting signals. However, the same basic principles are used today as those that were used in years past. If you are in need of a Rohde & Schwarz EB200, consider purchasing a refurbished one. Buying used test equipment is extremely cost effective, and this model has a solid track record of use in the field and has stood the test of time. In most cases these refurbished units are an excellent alternative to buying new, and offer a big cost savings in addition no down time and instant availability.
Find John on Google+

Its summer time, and the northern hemisphere is cranking down the AC; and all that extra demand on the power grid means rising electricity costs. Peak season is as good a time as any to reexamine your company’s energy efficiency, and what better way to do that then with one of Hioki’s Green Machine Power Quality Analyzers. Whether you’re beginning your first foray into power demand analysis, or you’re looking to upgrade with new professional grade equipment; Test Equipment Connection is offering great deals this season on New Hioki Power Quality Analyzer Kits. Check out the listings below to find the kit that best suits you:

Hioki 3169 Power Demand Analyzers:

A solid entry level unit; the 3169 Power Demand Analyzer is great for factory power supply maintenance or improving energy-saving efficiency. Test Equipment Connection offers a number of kits for the 3169-20 model (click on the hyperlinks below for further detail):

Hioki 3169-20-01-100 Clamp On Power HiTester – $2,695.00
Hioki 3169-20-01-1000 Power Demand Analyzer (Custom Kit) – $3,029.00
Hioki 3169-20-01-500 Power Demand Analyzer (Custom Kit) – $2,695.00
Hioki 3169-20-01-5000 Power Demand Analyzer (Custom Kit) - $3,295.00

Hioki 3197 Pro Power Quality Analyzers:

An advanced analyzer capable of measuring and recording voltage currents, swells, dips and more; perfect for assessing problems in power quality and efficiency. The following 3197 Pro kits are available (click on the hyperlinks below for further detail):

Hioki 3197-01-1000 Pro Power Quality Analyzer – $4,295.00
Hioki 3197-01-500 Pro Power Quality Analyzer – $3,995.00
Hioki 3197-01-5000 Pro Power Quality Analyzer – $4,395.00

Hioki 3198 Pro Power Quality Analyzers:

A professional grade “Class A” power analyzer, the 3198 Pro measures a wide dynamic range and features gapless recording for high accuracy analysis. The following 3198 Pro kits are available (click on the hyperlinks below for further detail):

Hioki 3198-01-1000 Pro Power Quality Analyzer – $8,860.00
Hioki 3198-01-500 Pro Power Quality Analyzer – $8,550.00
Hioki 3198-01-5000 Pro Power Quality Analyzer - $9,280.00

But wait, there’s more! When you buy any of the Hioki Power Quality Analyzer Kits listed above, you’ll also get an official Hioki Hat & Flashlight free!* (*=Available while supplies last, promotion ends September 2012).

For more on Hioki’s line of power quality analyzers, or to view our complete catalogue of Hioki products, visit our Hioki page at: http://www.testequipmentconnection.com/manufacturer/Hioki

Megger Demo Equipment Blowout Sale

Deep Discounts on Megger Demo Electrical Test and Measurement Equipment* (90-Day Warranty on all Demo Equipment – Valid for U.S. residents only – While They Last)

PFL20M1500-2 – Power Fault Locator 120V
$24,500 List Price | $21,683 Selling Price Quote Request

PFL40A2000-18 – Power Fault Locator
$43,405 List Price | $40,975 Selling Price
PFL 40-2000 w/wheels Quote Request

Delta 2000 – Automatic Insulation Power Factor Test Set 120 VAC, 60 Hz
$36,660 List Price | $34,607 Selling Price Quote Request

Delta 3000 – Automatic Insulation Power Factor Test Set with “PowerDB Onboard” software 120V/60 Hz
$41,595 List Price | $39,266 Selling Price Quote Request

MPRT 8430H4T6A0 – Relay Test Set 4 Voltage/4 Current Channels
$59,345 List Price | $52,521 Selling Price Quote Request

MPRT 8430H3T6A0 – Relay Test Set 3 Voltage/3 Current Channels
$48,645 List Price | $43,051 Selling Price Quote Request

MCT1600 – Current Transformer Saturation, Ratio/Polarity Tester
$13,500 List Price | $12,744 Selling Price Quote Request

PA-9 PLUS – Power Analyser
$7,872 List Price | $7,431 Selling Price
PA-9 Plus with 12 MG of Memory Quote Request

SK-SLM-8-01 -  8 Channel Recording Volt-Ammeter
$4,785 List Price | $4,235 Selling Price Quote Request

TTR25 – Hand-held Transformer Turns Ratio Tester
$2,550 List Price | $2,258 Selling Price Quote Request

TTR100 – Hand-held Transformer Turns Ratio Tester
$3,590 List Price | $3,178 Selling Price Quote Request

S1-552 – 5KV Insulation Tester
$4,435 List Price | $3,926 Selling Price Quote Request

S1-1052 – 10KV Insulation Tester
$5,340 List Price | $4,726 Selling Price Quote Request

S1-554 – 5KV Insulation Tester with High Noise Immunity
$6,030 List Price | $5,337 Selling Price Quote Request

METS6100-163 – 3-Phase Watthour Meter Test Set
$22,750 List Price | $16,514 Selling Price Quote Request

OPTIMA – 3-Phase Watthour Meter Test Set
$24,255 List Price | $21,467 Selling Price Quote Request

MDP1 – Megger Data Profiler
$1,200 List Price | $1,062 Selling Price Quote Request

TTR330 – 3-Phase Transformer Ratio Test Set
$11,900 List Price | $10,532 Selling Price Quote Request

TORKEL820 – Battery Load Unit
$17,350 List Price | $13,356 Selling Price Quote Request

TXL870 – Extra Load Unit
$6,800 List Price | $6,018 Selling Price Quote Request

FRAX101 – Sweep Frequency Analyzer
$16,400 List Price | $15,482 Selling Price Quote Request

IDAX300 – Insulation Diagnostic Analyzer
$30,640 List Price | $28,924 Selling Price Quote Request

PULSAR – 3-Phase Relay Test Set with 3 Current & 3 Voltage Modules
$48,060 List Price | $29,152 Selling Price Quote Request

SVERKER 760 – Relay Test Set
$10,050 List Price | $8,894 Selling Price Quote Request

S1-5010-(MN4886) – Insulation Testers
$8,000 List Price | $7,080 Selling Price Quote Request

PMM-1 (MN4022,MN4023 & MN4232) – Power Multi-meter Multifunction Measuring Instrument
$8,025 List Price | $7,103 Selling Price Quote Request

EGIL (MN5607,MN5608 & MN5609) – Circuit Breaker Analyzer
$16,575 List Price | $14,670 Selling Price Quote Request

BITE 2P – Battery Tester with Printer
$7,410 List Price | $6,559 Selling Price Quote Request

BITE 3 – Battery Tester
$6,188 List Price | $5,477 Selling Price Quote Request

BGFT -  Battery Ground Fault Tracer, 110/220V, 50/60 Hz
$9,280 List Price | $8,213 Selling Price

VIDAR – Vacuum Bottle Tester 115V/230V, 50/60Hz. 10-60kV DC Test Voltage
$7,575 List Price | $6,705 Selling Price Quote Request

B10E – B10E SoftStart, power supply unit includes cable set and transport case
$9,200 List Price | $8,142 Selling Price Quote Request

MJOLNER 200 – Microhmeter without accessories
$8,350 List Price | $7,390 Selling Price Quote Request

TM1800 – Circuit Breaker Analyzer System
$36,575 List Price | $32,370 Selling Price
TM1800 Standard unit includes (1) basic unit, (1) control module, (1) timing m/r module and (1) analog module. Includes CABA Win software. Quote Request

MTDR1 – Cable Analysis System
$8,900 List Price | $7,877 Selling Price
Stand-Alone MTDR Cable Analysis System with colored 8.4 inch full VGA, with QWERTY keypad, with COMLINK Application Software Quote Request

ODEN AT-3X – Primary Current Injection Test Set
$35,425 List Price | $31,352 Selling Price
ODEN AT/3X 240V, 50/60Hz. Primary current injection test set with timer, ammeter and three current units with additional 30/60V output. Includes two wheel cart. Cable set are not included and must be ordered separately. See listing of cable sets under optional accessories. Quote Request

S1-1054 – 10kV Insulation Resistance Tester
$7,265 List Price | $6,430 Selling Price
10kV Insulation Resistance Tester. Analogue/digital, battery or line-powered with auto IR, PI, Step voltage, Dielectric discharge,and Dielectric Absorbtion tests, 4mA noise rejection; RS232 or USB download and storage capabilities. Quote Request

Finally, a Test Set that Actually Simplifies Triple Play Testing

The New ParaScope mPA  with its IPTV auto-scan feature to its comprehensive copper testing, is the ideal tool for provisioning dependable IPTV and VoIP services running over VDSL2 and ADSL1/2/2+ circuits. Between now and September 30th, evaluate a ParaScope mPA and receive a 20%-off coupon certificate towards a purchase. That is a *savings of almost $1,500! Simply go *HERE* and Request your Free Evaluation Unit with 20%-off Coupon

Powerful features include:

• Large 7” bright touch-screen LCD and rugged enclosure
• Unmatched ease of use with Pass/Fail results. Use at customer premises, remote location or the central office and reduce truck rolls
• Copper qualification to identify physical layer faults and qualify the local loop for handling triple play services. Suite of tools includes integrated digital multi-meter (DMM), RFL meter, Longitudinal balance meter, TDR etc
• Complete service verification to determine the upstream and downstream rates, emulate the modem or STB, PING the ADSL or Ethernet and much more
• Triple Play Analysis including IPTV and VoIP QoS measurements, streaming video, phone emulation and more over ADSL1/2/2+, VDSL2  and 10/100 links
• CO Emulation for a wide variety of ADSL1/2/2+ and VDSL DSLAMs

Download the Frederick Engineering ParaScope mPA VDSL2 Triple Play Data Sheet HERE

Informative White Paper on Simplifying IPTV testing  – Parascope mPA simplifies IPTV Testing – Download the Free White Paper PDF HERE