New Martel BetaGauge Pressure Calibrators

New Martel BetaGauge Pressure Calibrators for EX Applications

Martel Electronics is shipping newly approved intrinsically safe versions of its advanced pressure calibrators, the BetaGauge 311A-EX and 321A-EX. The classified hazardous area approvals include IECEx and ATEX certification for world-wide use.

For seven years, the dual sensor BetaGauge 321A and single sensor BetaGauge 311A have been the replacements for the well-known BetaGauge 320. In addition to the approval to safely use the calibrators in hazardous areas without “hot work” permits, the EX versions include a new ClearBrite graphic LCD with intense backlight for a crisp and easily read black on white display.

The familiar Martel 3 key user interface (UI) is supported by a multi-mode operating system that allows a range of operations from simple measurements to very complex calibration applications such as natural gas custody transfer calibration.

As in the standard units, the calibrators are available in the user’s choice of 25 available pressure ranges from 10″ WC to 10,000 psi in compound, gauge, differential and absolute modes. The user can choose from 19 built-in engineering units and specify up to 2 custom units at the time of order.

The ability to measure up to 24 mADC at the same time as monitoring pressure means these calibrators are all that is needed to perform a complete calibration on a pressure transmitter in the field. It is also possible to perform pressure switch tests using the calibrator’s built-in pressure range(s).

A general accuracy on most ranges of ±0.025% of full scale over a wide variety of ambient temperature conditions insures that the BetaGauge 311A-EX/321A-EX will be useful for even the most demanding field calibration users.

Popular applications for these high performance calibrators include natural gas flow computer calibration, multi-variable transmitter calibration, calibration of all types of process pressure instrumentation and flow and level transmitters that use pressure inferred measurement techniques. The calibrators also offer special features for the testing of pressure switches commonly used in Safety Instrumented Systems (SIS) and other control and monitoring applications.

Martel Electronics Corporation offers a diversified line of hand-held and bench calibrators, process instruments, process indicators, power supplies, meters and displays, and test and measurement instruments manufactured to the highest quality standards for the process industry and OEM applications.


Martel
311A-EX Single Sensor

Martel
311A-EX Single Sensor High Strength

Martel
311A-EX Single Sensor Custody Transfer Kit

Martel
321A-EX Dual Sensor

Martel
321A-EX Dual Sensor High Strength

Martel
321A-EX Dual Sensor Custody Transfer Kit

The following two tabs change content below.
Mike is a finance industry executive with expertise in test, IT and avionics equipment acquisition, resale, residual valuation, leasing, renting and consignment.
This entry was posted in Manufacturer News. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *


− 5 = one

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>